Lift Station Alarm, Float and Control Panel Repair
- Home
- Lift Station Alarm, Float and Control Panel Repair
832-789-5357
The alarm is the only warning most properties get before a lift station backs up, so an alarm that is silent, broken or ignored is a risk in itself. Brown Aerobic repairs and tests lift station alarms, floats and control panels. Call 832-789-5357.
How do the alarm, floats and panel work together?
Three parts do the monitoring. Float switches hang in the wet well and rise with the water. The control panel reads them, starts and stops the pumps, and runs the alarm. The high-water alarm, usually a light and a horn, comes on when the water gets higher than it should.
If any one of the three fails, the others cannot make up for it. A stuck float can keep a healthy pump from starting. A failed alarm can let a high-water problem build with nobody told.
Why is my lift station alarm on?
- High water in the chamber, which means the pumps are not keeping up or not running
- A float that is stuck, tangled or covered in grease
- A pump that has failed or is clogged
- A tripped breaker or a loss of power to the station
- A fault in the panel or the alarm circuit itself
Silencing the horn does not fix any of these. It only stops the noise, and the problem is still there.
What do you check and repair?
- Float switches: whether they move freely and switch the pumps at the right levels
- The control panel: breakers, relays and wiring connections
- The alarm: whether the light and horn work and whether they come on at the right water level
- Any autodialer or remote alert, so the right person is told when the alarm triggers
- The pumps themselves, if the cause turns out to be there. See our lift station pump repair page.
How often should the alarm be tested?
An alarm that has never been tested is only a guess. We include alarm testing in a planned visit, and it is part of a lift station maintenance contract. How often is right depends on the station and the property, so we set that with you after looking at the equipment.
What should I do right now if the alarm is on?
- Cut back on water use at the property.
- Check the station's breaker.
- Do not open the chamber. It can hold harmful gases.
- Call us and describe what you see and hear.
Call 832-789-5357 or request a quote online. Estimates are free, and Se habla español. Property managers can also read our guide for HOAs and property managers.
Common questions
- Can you repair a lift station control panel?
Yes. We repair floats, control panels and alarms on lift stations. Because panels vary by manufacturer and station design, we confirm the scope when you call and give a free estimate before work begins.
- Is it enough to silence the alarm?
No. Silencing the horn stops the noise, but the cause is still there. Reduce water use, check the breaker and call so the cause can be found.
- What is an autodialer on a lift station?
It is a device wired to the alarm that calls or texts the people you choose when the alarm triggers, so you hear about a problem even if nobody is at the station.
- How do I know my alarm actually works?
Only a test tells you. We test the light, the horn and the alarm level as part of a planned visit.
Ready to get started?
Call 832-789-5357, request a quote, or book online. Se habla español.
